Allied Telesis SwitchBlade x3100 Series Manual page 142

Introduction
SHOW SCRIPT
Syntax
SHOW SCRIPT=filename
Displays the contents of a Command Line Interface (CLI) script. A script contains CLI
Description
commands that are executed through the EXECUTE SCRIPT command.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SHOW SCRIPT CLIENT_EPSR_SETUP
1-112
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
SCRIPT The filename of a valid script file
CFC Media (SD Card)
Default Value
N/A