Allied Telesis SwitchBlade x3100 Series Manual page 718

Introduction
DISABLE ARPFILTER INTERFACE
Syntax
DISABLE ARPFILTER INTERFACE={type:id-range|id-range|ifname-
list|ALL}
Used to disable the behavior of ENABLE ARPFILTER for the specified interface or inter-
Description
faces.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DISABLE ARPFILTER INTERFACE=
6-158
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
INTERFACE The interface where ARP will be disabled.
17.4
Configuring ARP
Default Value