Allied Telesis SwitchBlade x3100 Series Manual page 49

Configuring an Alias
RENAME ALIAS TO
Syntax
RENAME ALIAS=aliasname TO=aliasname
Renames an existing alias. As with the original name, it must follow the same naming rules
Description
(An alias name may not match all or part of existing CLI command root keywords, such
as s, sh, sho, or show.).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
ALIAS
TO
Example
RENAME ALIAS=su TO=super
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The name of the alias to be renamed
The renamed alias. It must match the same naming rules
as the original one.
Introduction
Default Value
1-19