Allied Telesis SwitchBlade x3100 Series Manual page 316

Configuring the GE24POE Card
SET POE THRESHOLD
Syntax
SET POE THRESHOLD=1..99
Sets the PoE options for the system for the power usage threshold. This is the percent-
Description
age of the total power available that is currently being used (instantaneous usage, not
requested usage). The default threshold is 99 percent. When the threshold is exceeded,
an alarm notification is recorded.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET POE THRESHOLD=75
3-14
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
Option Description
THRESH- Percentage of total power available that is currently in
OLD use. The range is 1-99 percent.
Configuration Guidelines
Default Value
99