Allied Telesis SwitchBlade x3100 Series Manual page 830

Introduction
SHOW LLDP COUNTER
Syntax
SHOW LLDP COUNTER [ INTERFACE={ type:id-range | id-range | ifname-
list | ALL } ] [ FULL ]
Allows the user to view the runtime data (local system LLDP counters) for each inter-
Description
face specified. Packets counted include frames as well as Type-Length-Value (TLV) infor-
mation elements, which are variable in length. Counters include: Receive Frames (Total,
with Errors, Discarded); Received TLVs (Discarded, Unrecognized Transmitted); and
Frames (Total).
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
E134 - officer SEC>>>> show lldp counter
--- LLDP Counters ---
Transmit
Interface Total
--------- --------
0.0
0.1
0.2
2.0
2.1
2.2
2.3
3.22
10.16
10.17
7-92
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Option Description
INTERFACE A logical representation of one or more physical ports;
the INTERFACE for which RMON data is enabled
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
If the INTERFACE parameter is not pro-
ALL -
vided, then all interfaces are displayed.
FULL The runtime information is displayed in tabular format,
unless the FULL parameter is provided.
Received Port Frames
Total Errors Discarded
------ ------ ---------
757 757
0 0
0 0
0 0
0 0
0 0
0 0
759 758
0 0
0 0
Received Port TLVs
Discarded Unrecognized
--------- ------------
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Configuring LLDP
Default Value
ALL
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0