Allied Telesis SwitchBlade x3100 Series Manual page 910

User Event Logging
SET TRACE BUFFERSIZE
Syntax
SET TRACE [ BUFFERSIZE=events [ FORCE ] ]
This command sets general options for all logs of a given type. The only available option
Description
now is the Log Event buffersize. Resizing the buffer purges all current logs and creates a
new buffer for storing logs. This will also generate an Event Log so that the user can see
that the logging buffer was cleared at this point. The maximum size of the buffer is 10,000
logs.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SET TRACE BUFFERSIZE=EVENTS
8-38
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
Option Description
BUFFERSIZE The number of log events
FORCE
Event Logging TRACE Commands
Default Value
200 logs