Allied Telesis SwitchBlade x3100 Series Manual page 645

Configuring a TACACS+ Server
ENABLE RADIUS SERVER (SEC)
Syntax
ENABLE RADIUS SERVER={ ipaddress-list | hostname-list | ALL }
Used to enable one or more RADIUS servers for use in user authentication requests.
Description
Once enabled, the RADIUS server(s) are used for future user authentication requests.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
SERVER
Example
ENABLE RADIUS SERVER=
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
ipaddress-list - comma-separated list of IP addresses.
hostname-list - comma-separated list of IP addresses.
ALL - Enable all configured RADIUS servers.
10.10.10.10
Introduction
Default Value
6-85