Allied Telesis SwitchBlade x3100 Series Manual page 675

Configuring Port Authentication
ENABLE DOT1X INTERFACE
Syntax
ENABLE DOT1X INTERFACE={ type:id-range | id-range | ifname-list |
ALL }
This command enables 802.1X Port Authentication on the interface specified. For the
Description
feature to be enabled, DOT1X must already be enabled at the system level.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
Example
ENABLE DOT1X INTERFACE=6.22-6.23
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ethernet interfaces over which the 802.1X feature
will be enabled.
Introduction
Default Value
N/A
6-115