Allied Telesis SwitchBlade x3100 Series Manual page 523

Configuring VLAN Based HVLAN
SHOW HVLAN
Syntax
SHOW HVLAN [ ={ hvlanname-list | vid-range | ALL } ] [ FULL ]
Displays information about the specified Hierarchical VLAN (HVLAN).
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
HVLAN
FULL
Example
SHOW HVLAN
--- HVLAN Information ---------------------------------------------------------
Name
--------------- ---- ------ ---------- ------------------
vlan4000
-------------------------------------------------------------------------------
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The list of provisioned HVLAN names, separated by a
comma, or the range of HVLAN IDs.
If no HVLAN name or identifier is specified, then ALL is
assumed.
A summary of all HVLANs is presented.
ALL -
Displays detailed information for each HVLAN.
VID Tunnel Forwarding Tagged Interfaces
Type Mode
4000 PORT Standard ETH:[3,8-9.2]
Introduction
Default Value
ALL
Summary informa-
tion for all
HVLANs is dis-
played
Untagged Interfaces
-----------------
<none>
4-203