Allied Telesis SwitchBlade x3100 Series Manual page 549

Configuring IGMP
DELETE TRACE IGMPSNOOPING
Syntax
DELETE TRACE IGMPSNOOPING [ MESSAGETYPE={ REPORTV1 | REPORTV2 |
LEAVE | GENERALQUERY | LASTMEMBERQUERY | ALL } ] [ INTERFACE={
type:id-range | id-range | ifname-list | ALL } ] [ MACADDRESS={
macaddress | ALL } ] [ GROUPADDRESS={ ipaddress | ALL } ]
Delete the events which match the given filters. Not specifying MESSAGETYPE or
Description
INTERFACE or MACADDRESS or GROUPADDRESS will treat that parameter as a wild-
card.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
MESSAGE-
TYPE
INTERFACE
MACAD-
DRESS
GROUPAD-
DRESS
Example
DELETE TRACE IGMPSNOOPING INTERFACE=1.23G
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management Pro-
tocol (IGMP))
Description
The interface from which the MAC address was learned
The interface(s) where the trace will be deleted.
The MAC address as learned from the source address
field of a frame, or entered as part of a static filter entry.
Example: 00:0C:25:00:13:8C.
The IP address of the multicast group
ALL - All IP addresses of the multicast groups
Introduction
Default Value
ALL
ALL
ALL
ALL
5-17