Delete Trace Authentication - Allied Telesis SwitchBlade x3100 Series Manual

Configuring Port Authentication

DELETE TRACE AUTHENTICATION

Syntax
DELETE TRACE AUTHENTICATION [ INTERFACE={ type:id-range | id-range
| ifname-list | ALL } ] [ TYPE={ DOT1X } ] [ EVENT={ { SUCCESS |
FAILURE | LOGOFF } [ ,... ] | ALL } ]
Deletes various tracing parameters for port authentication.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
TYPE
EVENT
[ ,... ]
Example
DELETE TRACE AUTHENTICATION INTERFACE=6.22-6.23
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ethernet interfaces over which the 802.1X tracing
parameters are deleted.
The Port Authentication method to add. Only DOT1X
is currently supported
Specifies the type of Port Authentication event to
delete:
SUCCESS - Authentication has succeeded, and so a data
session can begin.
FAILURE - Authentication has failed.
LOGOFF - The supplicant has logged off, and the port
returns to an unauthorized state.
ALL - All types of events are included.
Any combination of the Event types can be inserted
here, separated by a comma.
Introduction
Default Value
ALL
DOT1X
ALL
6-111