Allied Telesis SwitchBlade x3100 Series Manual page 631

Configuring Queue Mapping
TABLE 6-14
Step Command
Limit the upstream flow of data with a TRAFFICDESCRIPTOR that has burst and rated values. This is associated with the
qos_data classifier. Also, specify that packets that exceeds these values will be dropped and counted
CREATE TRAFFICDESCRIPTOR=limit_data RATE=200m BURSTSIZE=512KB
5
ADD TRAFFICDESCRIPTOR=limit_data CLASSIFIER=qos_data NCDROP NCCOUNT=ON
SHOW CLASSIFIER
--- Classifier Configuration Data ----------------------------------------
Name
------------ ---------------------------------------- -------------------
qos_data
qos_video
qos_voice
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Configuration procedure for QoS
Field Match(es)
MACSOURCE=ANY
IPSOURCE=ANY
IPDEST=10.52.17.69/32
VID=300
Description (Optional)
Action(s)
SETVPRIORITY=0
TRAFFICDESCRIPTOR=limit_
data
NCDROP
NCCOUNT
SETVPRIORITY=4
SETVPRIORITY=6
Introduction
6-71