Allied Telesis SwitchBlade x3100 Series Manual page 472

Introduction
ADD TRACE EPSR MESSAGETYPE
Add an EPSR trace to an interface. Detailed call events pertaining to a port or set of
Description
ports can be obtained by defining and enabling trace log criteria.
Syntax
ADD TRACE EPSR [ ={ epsrdomain-list | ALL } ]
MESSAGETYPE={ HEALTH | RINGUPFLUSH | RINGDOWNFLUSH | LINKDOWN |
LINKFORWARDREQUEST | PERMISSIONLINKFORWARD | QUERYLINKSTATUS | ALL
}
[ INTERFACE={ type:id-range | id-range | ifname-list | ALL } ]
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Example
ADD TRACE EPSR NC MESSAGETYPE HEALTH
4-152
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Option Description
EPSR The name(s) that has been given to the EPSR
domain(s)
MESSAGETYPE The EPSR message types
INTERFACE The interfaces where the TRACE will occur
EPSR and (R)STP Interaction
Default Value
NA
ALL