Allied Telesis SwitchBlade x3100 Series Manual page 548

Introduction
DELETE IGMPSNOOPING FLOODING
Syntax
DELETE IGMPSNOOPING FLOODING { ALL | ALLSTANDARD | DVMRP | OSPFALL
| OSPFDESIGNATED | RIP2 | IGRP | DHCPRELAY | PIM | RSVP | CBT |
VRRP | DXCLUSTER | CISCONHAP | HSRP | MDNS | CUSTOM=groupname } [
VID={ vid-list | ALL } ] [ FORCE ]
The DELETE IGMPSNOOPING FLOODING command is used to delete the reserved
Description
multicast IP addresses from the system, so that the requested addresses can be dropped
instead of being forwarded.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FLOODING
VID
FORCE
Example
DELETE IGMPSNOOPING FLOODING ALLSTANDARD VID=401
Delete IGMPSNOOPING FLOODING ALLSTANDARD settings (Y/N)?Y
Operation Successful
5-16
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
Description
The types of reserved mulitcast addresses.
ALL - All standard reserved mulitcast addresses
(DVMRP, OSPF All Routers, OSPF Designated Routers,
RIP2, IGRP, DHCP RELAY, PIM, RSVP, CBT, VRRP,
DxCLUSTER, CISCONHAP, HSRP, and MDNS.)
CUSTOM -
The VLAN list where this configuration will apply
Bypasses the confirmation message
Configuring IGMP
Default Value
ALL