Show Authentication Supplicant - Allied Telesis SwitchBlade x3100 Series Manual

Configuring Port Authentication

SHOW AUTHENTICATION SUPPLICANT

Syntax
SHOW AUTHENTICATION SUPPLICANT[=macaddress-list|ALL]
[INTERFACE={type:id-range|id-range|ifname-list|ALL}] [FULL]
Displays the current status of the selected supplicant(s).
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
SUPPLI-
CANT
INTERFACE
FULL
Example
SHOW AUTHENTICATION SUPPLICANT
--- Port Authentication Supplicant ---
Number of Supplicants................. 1
Number of Authorized Supplicants...... 0
--- Port Authentication Supplicant ---
Interface UserName
--------- ----------------- --------- ---- -------------- -----------------
ETH:6.22 user1
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
Specifies a supplicant's MAC address or ALL supplicants.
The ethernet interfaces over which the authentication
parameters will be shown.
Displays more descriptive information
Type VLAN Status
802.1X 301
MacAddress
Authenticating 00:09:41:58:E6:F2
Introduction
Default Value
ALL
ALL
Abbreviated
6-127