Allied Telesis SwitchBlade x3100 Series Manual page 701

Configuring SSH
TABLE 6-23
Counter
RxSSHMsgUnimplemented
TxSSHMsgUnimplemented
RxSSHMsgDebug
TxSSHMsgDebug
RxSSHMsgServiceRequest
TxSSHMsgServiceRequest
RxSSHMsgServiceAccept
TxSSHMsgServiceAccept
RxSSHMsgKexInit
TxSSHMsgKexInit
RxSSHMsgNewKeys
TxSSHMsgNewKeys
RxSSHMsgKexDhInit
TxSSHMsgKexDhInit
RxSSHMsgKexDhReply
TxSSHMsgKexDhReply
RxSSHMsgUserAuthRequest
TxSSHMsgUserAuthRequest
RxSSHMsgUserAuthFailure
TxSSHMsgUserAuthFailure
RxSSHMsgUserAuthSuccess
TxSSHMsgUserAuthSuccess
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
SSH Server Counters
Description
Indicates the number of SSH_MSG_UNIMPLEMENTED messages received
and transmitted. This message is a reserved message used for future imple-
mentations and is ignored.
Indicates the number of SSH_MSG_DEBUG messages received and transmit-
ted. This message is used to exchange debug information between each end
of a connection.
Indicates the number of SSH_MSG_SERVICE_REQUEST messages received
and transmitted. This message is used to request a specific service.
Indicates the number of SSH_MSG_SERVICE_ACCEPT messages received
and transmitted. This message is a response to the
SSH_MSG_SERVICE_REQUEST message and indicates that the service
requested is provided.
Indicates the number of SSH_MSG_KEXINIT messages received and trans-
mitted. This message initiates a key exchange during authentication.
Indicates the number of SSH_MSG_NEWKEYS messages received and trans-
mitted. This message ends a key exchange during authentication.
Indicates the number of SSH_MSG_KEXDH_INIT messages received and
transmitted. This message initiates a Diffie-Hellman key exchange during
authentication.
Indicates the number of SSH_MSG_KEXDH_REPLY messages received and
transmitted. This message is a reply to the SSH_MSG_KEXDH_INIT mes-
sage and provides the exchange hash, which is used to authenticate the key
exchange.
Indicates the number of SSH_MSG_USERAUTH_REQUEST messages
received and transmitted. This message makes a request for authentication.
Indicates the number of SSH_MSG_USERAUTH_FAILURE messages
received and transmitted. This message is a response to the
SSH_MSG_USERAUTH_REQUEST message and indicates that either the
request was rejected or more authentication is required..
Indicates the number of SSH_MSG_USERAUTH_SUCCESS messages
received and transmitted. This message is a response to the
SSH_MSG_USERAUTH_REQUEST and indicates that the authentication
request was accepted.
Introduction
6-141