Allied Telesis SwitchBlade x3100 Series Manual page 269

XE4 Card Attributes
DESTROY CARD
Syntax
DESTROY CARD=slot-list [FORCE]
Removes software provisioning for the specified card or list of cards. The command fails if
Description
the administrative state for each card has not already been set to DOWN (See DISABLE
CARD). A warning is provided for this command and confirmation is required.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FORCE
DESTROY CARD=2 GE24POE
Example
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
Suppress.es the warning and bypasses the confirmation
Introduction
Default Value
1-239