Allied Telesis SwitchBlade x3100 Series Manual page 349

Configuring LAG
TABLE 4-3
Step Command
show interface 3.0 full
4
--- GE Interfaces ---
Interface.......................... 3.0
Type............................... GE
State.............................. UP-UP-Online
Description........................ <none>
Remote ID.......................... <none>
External Profile................... <none>
Card Type.......................... GE24SFP
Provisioning
Provisioning Profile............ AutoProv (*)
Direction....................... Network
Auto Negotiation................ On
Speed........................... 1 Gbps
Duplex.......................... Half
Flow Control................ On
Remote Monitoring............... On
Actual
Direction....................... Network
Physical Address................ EC:CD:6D:03:6E:EF
Speed........................... 1 Gbps
Duplex.......................... Half
Flow Control...............
VLAN Information
Acceptable Frame Types.......... All
Ingress Filtering............... On
TPID............................ 0x8100
TAGALL.......................... Off
Dynamic MAC Learning Limit...... 0
Untagged VLAN................... 1
Untagged VLAN..............
Packet Statistics
Octets..........................
Unicast Packets.................
Discarded Packets...............
Errored Packets.................
Prepare the 3rd interface
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for Creating a Cross-Card LAG
On
10
Input
------------- -------------
136620
Description/Notes
Output
233398572
90 153754
0 0
0 0
Introduction
4-29