Allied Telesis SwitchBlade x3100 Series Manual page 637

Configuring a RADIUS Server
TABLE 6-16
Step Command
Verify the new settings for authentication mode, accounting period, interim updates, timeout value and number of
retries.
SHOW RADIUS
6
--- RADIUS --------------------------------------------------------------------
Auth Mode............................. Login
Interim-Update........................ ON
Accounting Period..................... 60
-------------------------------------------------------------------------------
--- RADIUS Servers ------------------------------------------------------------
Hostname/IP
Address
---------------- -------- --- ----- ----- ------- ----- ---------------- -----
10.10.10.10
Disable the RADIUS server
DISABLE RADIUS SERVER=10.10.10.10
7
Verify that RADIUS server has been disabled.
SHOW RADIUS
8
--- RADIUS --------------------------------------------------------------------
Auth Mode............................. Login
Interim-Update........................ ON
Accounting Period..................... 60
-------------------------------------------------------------------------------
--- RADIUS Servers ------------------------------------------------------------
Hostname/IP
Address
---------------- -------- --- ----- ----- ------- ----- ---------------- -----
10.10.10.10
Delete the RADIUS server
DELETE RADIUS SERVER 10.10.10.10
9
Verify that RADIUS server has been deleted
SHOW RADIUS
10
--- RADIUS Servers ------------------------------------------------------------
No RADIUS servers configured.
------------------------------------------------------------------------------
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Configuration Procedure for RADIUS Server
Auth Acct
Status Pri Port Port
Enabled 1 1812 1813
Auth Acct
Status Pri Port Port
Disabled 1 1812 1813
Description
Time
Retries out Function
5 10 AUTHENTICATION
Time
Retries out Function
5 10 AUTHENTICATION,
ACCOUNTING
Introduction
Type
LOGIN
Type
LOGIN
6-77