Allied Telesis SwitchBlade x3100 Series Manual page 460

Introduction
TABLE 4-19
Step Command
show epsr allied-2
4
--- EPSR Domain Information ---
EPSR Domain Name...................... allied-2
EPSR Domain Node Type................. Transit
EPSR Domain State..................... IDLE
MAC Address of Master Node............ 00:00:00:00:00:00
EPSR Domain Status.................... Disabled
Control Vlan.......................... -
Enhanced Recovery..................... ON
Ring Interface # 1.................... <unknown>
Physical State of Ring Interface # 1.. <unknown>
Ring Interface # 1 Type............... <unknown>
Ring Interface # 1 State.............. <unknown>
Ring Interface # 1 Priority........... <unknown>
Ring Interface # 1 Priority Rank...... <unknown>
Ring Interface # 2.................... <unknown>
Physical State of Ring Interface # 2.. <unknown>
Ring Interface # 2 Type............... <unknown>
Ring Interface # 2 State.............. <unknown>
Ring Interface # 2 Priority........... <unknown>
Ring Interface # 2 Priority Rank...... <unknown>
Data Vlans............................ -
Create the control and data VLANs
create vlan vid 6,20,200,300
5
Add control/data VLANs to the interfaces (with TAGGED framing)
ADD VLAN=6 INTERFACE=ETH:[0.0],[3,8-9.2]
6
FRAME=TAGGED
ADD VLAN=20 INTERFACE=ETH:[3,8-9.2]
FRAME=TAGGED
ADD VLAN=200 INTERFACE=ETH:[3,8.2]
FRAME=TAGGED
ADD VLAN=300 INTERFACE=ETH:[3,9.2]
FRAME=TAGGED
Delete the interfaces from the default VLAN
DELETE VLAN=1 INTERFACE=ETH:[0.0],[3.2],
7
[8.2],[9.2]
4-140
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for SuperLoop - Peer SuperLoop Domain
Configuring SuperLoop
Description
Creates 4 VLANs with the following IDs: 6, 20,
200 and 300.
Adds interfaces 0.0, 3.2, 8.2 and 9.2 to VLAN 6
and sets framing to tagged.
Adds interfaces 3.2, 8.2 and 9.2 to VLAN 20
and sets framing to tagged.
Adds interfaces 3.2 and 8.2 to VLAN 200 and
sets framing to tagged.
Adds interfaces 3.2 and 9.2 to VLAN 300 and
sets framing to tagged.
Deletes interfaces 0.0, 3.2, 8.2 and 9.2 from the
default VLAN (VID=1).