Allied Telesis SwitchBlade x3100 Series Manual page 238

Introduction
Hardware
Model Number........................ <none>
Serial Number....................... <none>
Actual
Voltage (measured/nominal).......... <unknown>/56.0 Volts
Current............................. <unknown> Amps
Power............................... <unknown> Watts
Temperature......................... 0 degrees Celsius
PSU Faults
PSU Card Not Present............ Major
officer SEC>> destroy psu a force
Info (010017): Operation Successful
officer SEC>> show psu a
-------------------------------------------------------------------------------
No information to display from settings provided
-------------------------------------------------------------------------------
officer SEC>> create psu a
Info (010017): Operation Successful
officer SEC>> show psu a
--- Power Supply Units ---
Slot.................................. A
Type.................................. POE
State................................. UP-DN-NotInstalled
Hardware
Model Number........................ <none>
Serial Number....................... <none>
Actual
Voltage (measured/nominal).......... <unknown>/56.0 Volts
Current............................. <unknown> Amps
Power............................... <unknown> Watts
Temperature......................... 0 degrees Celsius
1-208
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Power Management