Allied Telesis SwitchBlade x3100 Series Manual page 200

Introduction
DESTROY LOG FILTER
Syntax
DESTROY LOG FILTER={filterid-list|ALL}
Removes management log filters from the system. Upon successful completion of this
Description
command, the specified management log filter is completely removed from the system.
The log filter is also removed from all log output destinations that have had the filter
added with the ADD LOG FILTER command.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DESTROY LOG FILTER=rmon_filter
1-170
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
FILTER Name given for the log filter.
Logging Procedures
Default Value