Allied Telesis SwitchBlade x3100 Series Manual page 670

Introduction
DELETE TRACE AUTHDEBUG
Syntax
DELETE TRACE AUTHDEBUG INTERFACE={ type:id-range | id-range |
ifname-list | ALL } EVENT={ { EAPOL | AUTHSERVER | ACCT } [ ,... ]
| ALL }
Deletes various tracing parameters for port authentication.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
DELETE TRACE AUTHDEBUG
Info (010017): Operation Successful
officer SEC>> SHOW TRACE AUTHDEBUG
---------------------------------------
No information to display from settings provided
---------------------------------------
6-110
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
INTERFACE The ethernet interfaces over which the trace will be
added.
EVENT Specifies the type of Port Authentication trace to add:
EAPOL - The EAP messages sent and received between
the supplicant and the authenticator (SBx3112).
AUTHSERVER - The Authorization RADIUS packets
sent and received between the RADIUS server and the
authenticator (SBx3112).
ACCT - The accounting messages processed by the
RADIUS server.
ALL - All types of traces are included.
Any combination of the Event types can be inserted
[ ,... ]
here, separated by a comma.
Configuring Port Authentication
Default Value
ALL