Allied Telesis SwitchBlade x3100 Series Manual page 736

Introduction
SHOW MACFF GROUP
Syntax
SHOW MACFF GROUP={ groupname-list | ALL } [ VLAN={ vlanname-list |
vid-range | ALL } ] [ HOST={ ipaddress-list | ALL } ] [ INTERFACE={
type:id-range | id-range | ifname-list | ALL } ]
Shows information related to a particular GROUP. The information can be filtered by
Description
selecting specific VLANs, host IP addresses, or interfaces.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
officer SEC>> show macff GROUP=B VLAN=363
--- MAC Forced Forwarding Status ---
Interface Mode
-------------- ------- ---- -------------------- --------------- -------
11.0 Discard 363
11.0 Discard 363
11.0 Discard 363
6-176
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
GROUP A groupname or list of groupnames, separated by a
comma, or ALL groupnames that have been created.
VLAN A VLAN or list of VLANs, separated by a comma
ALL - ALL VLANs that have been associated with the
group(s).
HOST The static IP addresses that have an association with the
group(s),
INTERFACE Interfaces that are part of the group(s)
All interfaces that have association with the
ALL -
VLANs in the group(s).
VLAN Group
B
B
B
Configuring Local ARP Discard
Host Type
1.1.50.23 Static
1.1.50.24 Both
1.1.50.12 Dynamic
Default Value
ALL