Allied Telesis SwitchBlade x3100 Series Manual page 607

Configuring ACL
RESET ACCESSLIST
Syntax
RESET ACCESSLIST=accesslistname RULE=rulenumber
[ { PERMIT | DENY } ]
Clears all of the fieldname/fieldvalue pairs from the RULE, resulting in a classifier that
Description
always matches all packets. This command does not remove association of the ACCESS-
LIST or INTERFACE(s). Use DELETE ACCESSLIST for those types of changes.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
ACCESSLIST
RULE
Action
Example
RESET ACCESSLIST=metro RULE=2 PERMIT
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The ACCESSLIST Name that already exists.
The rule number that is being reset.
PERMIT
DENY
Introduction
Default Value
Whatever was
previously applied
6-47