Allied Telesis SwitchBlade x3100 Series Manual page 769

Configuring DHCP Relay
DELETE DHCPRELAY SERVER
Syntax
DELETE DHCPRELAY={ dhcpname-list | MAIN | ALL } SERVER={ ipaddress-
list | ALL } [ FORCE ]
The DELETE DHCPRELAY SERVER command is used to delete the DHCP server IP
Description
addresses configured with the Relay agent instance(s). The user can specify a single IP
address or the comma separated list of IP addresses. Note that the FORCE option can be
used to override CLI command confirmation behavior if implemented.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
DHCPRELAY
SERVER
FORCE
Example
DELETE DHCPRELAY=
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
ipaddress-list - the list of IP addresses being sent to the
DCHP server by the relay agent separated by a comma
ALL - all DHCP servers
Overrides the CLI command confirmation behavior.
x3112 SERVER=
10.52.65.39
Introduction
Default Value
N/A
N/A
7-31