Allied Telesis SwitchBlade x3100 Series Manual page 24

Basic principles of computer networking, protocols and routing, and interfaces
•
Administration and operation of a computer network.
•
III Reason for Update (Issue 2)
The first release of this product was 14.1. The following table lists features that have been added, changed, or
deleted for 14.2.
TABLE i-1
Feature
Multiple Spanning Tree Proto-
col (MSTP)
Port Authentication
GE24SFP
This document is being reissued for the point release 14.2.1, and contains minor technical corrections. For
more information on fixes in release 14.2.1, refer to the Release Notes.
IV Documentation Structure and Features
In the table below is a feature listing that follows the remainder of this document. For each feature there is a
reference link. A Notes column provides additional information and highlights any aspect of the feature that the
user should immediately be aware of.
When viewing this document in pdf, you can go to the previous viewed pdf page by using Alt / left
Note:
arrow. (Use Alt / right arrow to go to the following viewed pdf page.)
i-2
Software Reference for SwitchBlade x3100 Series Switches (Preface)
Reason for Update for Release 14.2
14.1 Functionality
Not Available
Not Available
Not Available
14.2 Functionality
All functions of the feature are
available.
The 802.1X method is sup-
ported.
Card can fit into any slot
except slots 4 and 5 (reserved
for CFC200).
Notes
Refer to Spanning Tree
Introduction: STP, RSTP,
MSTP and BPDU Cop.
Refer to Port Authentica-
tion.