Getting Started; Connecting To The Sbx3112 - Initial Interface; How To Log In - Allied Telesis SwitchBlade x3100 Series Manual

Introduction

1.3 Getting Started

1.3.1 Connecting to the SBx3112 - Initial Interface

In the SwitchBlade x3112 Installation Guide, one of the last steps is to "Start a Local Management Session." The
user connects a management cable to the Console RS-232Port on the AT-SBx31CFC Card and then connects
the other end of the cable to an RS-232 port on a terminal or a personal computer with a terminal emulation
program. Once connected and configured, the user can log in to the SBx3112.
Refer to the following figure, which shows the local terminal connected to the CONSOLE port.
SBx31CFC
MASTER
M/S
SL AVE
NORMAL
PSU
FAULT
NORMAL
FAN
FAULT
RESET
SD
REA DY
CFC200-0001

1.3.2 How to Log In

The default user id / password for the systems are as follows:
•
officer/officer
If the default user "officer" or "manager" has its password set to the default value (officer or friend), the follow-
ing login message is displayed:
*************************************************************************
* Warning: The password for the user 'officer' is the system default.
* The password should be changed to avoid a security risk.
* Warning: The password for the user 'manager' is the system default.
* The password should be changed to avoid a security risk.
*************************************************************************
1-4
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
SBx S TATUS
0 1
2 3
4 5 CFC
6 7
M/S
8 9
PSU
10 11
FAN
L/A
10/100/1000Base-T
B USY FAULT
Initial Communication Interface for the SBx3112
FIGURE 1-2
or
manager/friend
Connecting to the SBx3112 - Initial Interface
1000 LINK AC T
10/100 LINK AC T
CONSOLE
RS-232
RS-232 Cable