Allied Telesis SwitchBlade x3100 Series Manual page 276

Introduction
SET INTERFACE EXTERNALPROFILE
Syntax
SET INTERFACE={ type: | type:id-range | id-range | ifname-list |
ALL }
EXTERNALPROFILE={ profile | NONE }
Supports the specification of an external profile name on an interface. When the Allied-
Description
View NMS sets the port attributes by deploying an NMS profile, the
command on the product displays the NMS profile name that has been applied as an
External Profile name. Moreover, if at the NMS a port is deprovisioned, the product
output for External Profile is set to None.
When the SBx3112 is managed by the NMS, this command should not be used.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
SET INTERFACE=8.* EXTERNALPROFILE=GE24POE_ClassA
Example
1-246
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
INTERFACE The interface that will have the external profile.
EXTERNAL- Used to identify the name of a profile associated with
PROFILE the interface that is external to the SBx3112, such as the
NMS. This parameter is used by external management
systems to identify the profile specified by the manage-
ment system. The profile name can then be used by CLI
users to correlate external configuration settings with
interfaces.
XE4 Card Attributes
SHOW INTERFACE
Default Value