Allied Telesis SwitchBlade x3100 Series Manual page 867

Configuring BFD
DISABLE BFD INTERFACE
Syntax
DISABLE BFD INTERFACE={ type:id-range | id-range | ifname-list |
ALL } [ FORCE ]
Disables BFD for the selected interface(s).
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
FORCE
Example
DISABLE BFD INTERFACE=
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
The interface where BFD will be disabled.
Overrides the confirmation message that command
could impact service if the remote peer is enabled.
8.18,8.19
Introduction
Default Value
7-129