Allied Telesis SwitchBlade x3100 Series Manual page 699

Configuring SSH
TABLE 6-21
Step Command
SET SSH SERVER REQUIREDAUTH=password,pub-
3
lickey,
ALLOWEDAUTH=password,publickey
LOGINTIMEOUT=600
Verify the SSH Server configuration and status
officer SEC> SHOW SSH SERVER
4
--- Secure Shell Configuration ---------------------------
SSH Version.......................... SSH-2
Server Enabled....................... Yes
Port................................. 22
Host Key ID.......................... master
Host Key bits........................ 512
Login Timeout (seconds).............. 600
Allowed Authentications.............. publickey,password
Required Authentications............. publickey,password
----------------------------------------------------------
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Configuration procedure for SSH (Continued)
.
Description
Introduction
6-139