Allied Telesis SwitchBlade x3100 Series Manual page 692

Introduction
SHOW DOT1X SUPPLICANT
Syntax
SHOW DOT1X SUPPLICANT[=macaddress-list|ALL] [INTERFACE={type:id-
range|id-range|ifname-list|ALL}] [FULL]
This command is used to display the current status of a supplicant which has been autho-
Description
rized by 802.1X-based Port Authentication.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
SHOW DOT1X SUPPLICANT
--- Port Authentication Supplicant ---
Number of Supplicants................. 1
Number of Authorized Supplicants...... 0
--- Port Authentication Supplicant ---
Interface UserName
--------- ----------------- --------- ---- -------------- -----------------
ETH:6.22 user1
6-132
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Option Description
SUPPLI- Specifies a supplicant's MAC address or ALL supplicants.
CANT
INTERFACE The ethernet interfaces over which the supplicant
parameters will be shown.
FULL Displays more descriptive information
Type
802.1X
Configuring Port Authentication
VLAN Status
301 Authenticating 00:09:41:58:E6:F2
Default Value
ALL
ALL
Abbreviated
MacAddress