Allied Telesis SwitchBlade x3100 Series Manual page 733

Configuring Local ARP Discard
DISABLE MACFF INTERFACE
Syntax
DISABLE MACFF INTERFACE={ type:id-range | id-range | ifname-list |
ALL } VLAN={ vid-range | vlanname-list | ALL }
Disables the MACFF function for the specified VLAN/Interface pairs. If INTERFACE=ALL
Description
or VLAN=ALL is input, all applicable VLAN/Interface pairs that were enabled are dis-
abled.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
VLAN
ALL
Example
DISABLE MACFF INTERFACE=
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The INTERFACE(s) that are to be disabled for the
VLAN/Interface pairs.
The VLAN(s) that are to be disabled for the VLAN/
Interface pairs.
If INTERFACE=ALL or VLAN=ALL is input, all applica-
ble VLAN/Interface pairs that were enabled are disabled
11.0 VLAN=301
Introduction
Default Value
6-173