Show Classifier - Allied Telesis SwitchBlade x3100 Series Manual

Configuring Classifiers

SHOW CLASSIFIER

Syntax
SHOW CLASSIFIER={ classifiername-list | ALL } [ { INTERFACE={
type:id-range | id-range | ifname-list | ALL } } ] [ { SUMMARY |
FULL } ]
There are two minor variations of this command: one that shows only CLASSIFIER data
Description
(independent of associations to INTERFACEs), and one that shows CLASSIFIERs in the
context of their associations to INTERFACEs. The command displays the CLASSIFIER
name, match rules, and actions. The second case shows only CLASSIFIERs associated
with the specified INTERFACE(s). It shows the relative precedence of each CLASSSIFIER
on that INTERFACE. It also identifies any classifiers that were not able to be applied to
the INTERFACE's hardware, resulting in classifier configuration alarms.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
CLASS-
FIERCLASS-
FIER
INTERFACE
SUMMARY
FULL
Example
SHOW CLASSIFIER INTERFACE=3.0
--- Classifier Configuration Data ----------------------------------
Interface Rank
----------- ------ ------------ ------------------------
ETH:3.0.0 51
52
69
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Description
The already created CLASSFIER(s), separated by a
comma
Shows only CLASSIFIERs that can be managed by the
user.
Shows two additional types of information not shown by
the SUMMARY option:
- "internal" classifiers, which are added by the system to
enable other features (e.g. IGMP snooping)
- "derived" match rules, which match fields implied but
not explicitly specified by higher protocol match rules
(e.g. rules added to match only IPv4 packets if IPDSCP
match rule is specified).
Name Field Match(es)
ipfilt1 IPSOURCE=192.168.1.0/24
ipfilt2 IPSOURCE=10.0.0.0/24
ipdrop IPSOURCE=ANY
Introduction
Default Value
SUMMARY
Action(s)
----------
FORWARD
FORWARD
DROP
COUNT
6-31