Allied Telesis SwitchBlade x3100 Series Manual page 727

Configuring Local ARP Discard
TABLE 6-27
Step Command
Enable the Local ARP Discard feature by enabling MACFF on the interface/VLAN combination, and this time
select the as
MODE LOCALARPDISCARDINGs
ENABLE MACFF INTERFACE=11.0 VLAN=301 MODE=LOCALARPDISCARDING
3
View the results
officer SEC>> show macff vlan=301
4
--- MAC Forced Forwarding Status ---
Interface
-------------- ------- ---- -------------------- --------------- -------
11.0
11.0
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
Configuration procedure for Dynamic IP Addresses
Mode VLAN Group
Discard 301 -
Discard 301 -
Introduction
Description
Host Type
1.1.50.2 Dynamic
1.1.50.3 Dynamic
6-167