Allied Telesis SwitchBlade x3100 Series Manual page 357

Configuring LAG
DELETE LAG
Syntax
DELETE LAG=lagname
INTERFACE={ type:id-range | id-range | ifname-list | ALL}
This command removes ports from the LAG group.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
LAG
INTERFACE
Example
DELETE LAG=card1_card8 INTERFACE=1.0,1.1
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
The lagname already created.
The XE or GE interfaces that will be included in the
individually or as a comma-
LAG. These can be added
separated id-ranges or as a forward-slash sepa-
rated type:id-ranges.
Introduction
Default Value
4-37