Allied Telesis SwitchBlade x3100 Series Manual page 881

Configurable Alarm Severity (Interface Alarm)
SET INTERFACE ALARM SEVERITY
Syntax
SET INTERFACE={ type:id-range | id-range | ifname-list | ALL }
ALARM SEVERITY={ NONE | INFO | MINOR | MAJOR | CRITICAL }
[ FORCE ]
Changes the alarm severity for the interfaces specified.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
INTERFACE
ALARM
SEVERITY
FORCE
Example
SET INTERFACE 0.23 ALARM SEVERITY=MAJOR
Info (020186): Successfully modified interface(s) ETH:[0.23]
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
Description
The interface(s) that will have their alarm severity set.
The alarm severity to apply to alarms generated by the
specified interfaces.
Disables the confirmation message.
Introduction
Default Value
N/A
8-9