Allied Telesis SwitchBlade x3100 Series Manual page 242

Introduction
DESTROY PSU
Syntax
DESTROY PSU={ A | B | C | D }
Destroys the one to four PSUs for the SBx3112
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
DESTROY PSU=B
Example
1-212
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
PSU The DESTROY PSU command allows the user to
destroy POE Power Supply Units (PSUs). The
DESTROY PSU command assumes that slot A and B are
for POE type PSUs, and slots C and D are for system
PSUs. PSUs can be destroyed from the system database
using DESTROY PSU, but only if they are not physically
present. The system will only allow one system
PSU1200 to be destroyed under any circumstance, but
will allow both POE PSUs to be destroyed if not physi-
cally present.
Power Management
Default Value