Allied Telesis SwitchBlade x3100 Series Manual page 71

Password Recovery
ENABLE USER (SEC)
Syntax
ENABLE USER=login-name
Re-enables an account that was previously disabled. Once enabled, the associated user
Description
can log into the system again until his/her access is disabled via the DISABLE USER com-
mand.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
USER
Example
ENABLE USER=coleman
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
The login name of the user
Introduction
Default Value
1-41