Allied Telesis SwitchBlade x3100 Series Manual page 129

CFC Media (SD Card)
DELETE FILES
Syntax
DELETE FILES={ filename-pattern | unit:filename-pattern } [ FORCE ]
Deletes the specified file from the CFC flash file system. The file must already exist on the
Description
CFC flash file system. The command is disallowed if the specified file is already designated
as a preferred load file for a provisioned card. The command is allowed for files that are
designated as alternate or temporary load files for a provisioned card. The DELETE FILE
command can also be used to delete the specified file from an SD card. In this case, file-
name must be preceded by the unit name, for example SD5:myFile.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FILES
FORCE
Example
DELETE FILES SD5:D104.CFG FORCE
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
One or more filenames to be deleted. Wildcards can be
used for multiple files. The unit is the SD unit on the
active CFC.
Suppresses the confirmation message.
Introduction
Default Value
1-99