Allied Telesis SwitchBlade x3100 Series Manual page 368

Introduction
TABLE 4-8
Step Command
show vlan videoHD
2
--- VLAN Information ----------------------------------------------------------
Name
--------------- ---- ---------- ---------------------- -----------------------
videoHD
show vlan videoHD full
3
--- VLAN Information ----------------------------------------------------------
Type.................................. VLAN
Name.................................. videoHD
Identifier............................ 4004
Status................................ Static
Forwarding Mode....................... Standard
IP module attached.................... <none>
Untagged Interfaces
Downstream.......................... <none>
Downstream (restricted)............. <none>
Tagged Interfaces
Downstream.......................... <none>
Downstream (restricted)............. <none>
VLAN Translation interfaces........... <none>
Add an interface to the new VLAN
add vlan videoHD interface 0.23 frame
4
tagged
Verify that interface has been added to VLAN
show vlan videoHD
5
--- VLAN Information ----------------------------------------------------------
Name
--------------- ---- ---------- ---------------------- -----------------------
videoHD
4-48
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for Creating a Standard VLAN
VID Forwarding Tagged Interfaces
Mode
4004 Standard <none>
VID Forwarding Tagged Interfaces
Mode
4004 Standard ETH:[0.23]
Configuring Standard VLANs
Description/Notes
Untagged Interfaces
<none>
Adds interface 0.23 (configured for tagged fram-
ing) to the new VLAN.
Untagged Interfaces
<none>