Show Ip Counter - Allied Telesis SwitchBlade x3100 Series Manual

Access of MIB Statistics Using an SNMP Browser

SHOW IP COUNTER

Syntax
SHOW IP COUNTER={TCP|UDP|ICMP}
Displays one of the three TCP,UDP, or ICMP protocol related counters based on the
Description
option specified by the user. Example SHOW IP COUNTER TCP will display TCP proto-
col-related counters available in the system.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
COUNTER
Example
E134 - officer SEC>>>> SHOW IP COUNTER TCP
--- TCP Statistics Available on the Device --------------------------
TimeOut Determination Algorithm.............................. 4
Minimum Retransmission Timeout (in msec)..................... 1000
Maximum Retransmission Timeout (in msec)..................... 64000
Maximum allowed TCP connections.............................. -1
Active Opens................................................. 2
Passive Opens................................................ 2
Attempt Failures............................................. 0
Connection Resets............................................ 1
Established Connections...................................... 2
Received Segments (incl. errors)............................. 930
Transmitted Segments (incl. errors).......................... 1156
Retransmitted Segments....................................... 0
Received Error Packets....................................... 0
Transmitted Error Packets with RST flag...................... 1
---------------------------------------------------------------------
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
Description
Displays TCP protocol-related counters
TCP -
available in the system.
isplays UDP protocol-related counters
UDP - D
available in the system.
isplays ICMP protocol-related counters
ICMP - D
available in the system.
Introduction
Default Value
None
7-117