Allied Telesis SwitchBlade x3100 Series Manual page 552

Introduction
RESET IGMPSNOOPING COUNTER
Syntax
RESET IGMPSNOOPING COUNTER [ { STANDARD | MESSAGERESPONSE | INTER-
FACE={ type:id-range | id-range | ifname-list | ALL } | CARD={
slot-list | ALL } } ]
Used to reset IGMP counters/statistics.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
COUNTER
CARD
Example
RESET igmpsnooping COUNTER INTERFACE=1.23
5-20
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
Description
STANDARD
MESSAGERESPONSE
INTERFACE
The slot of the card where the counters will be reset.
Configuring IGMP
Default Value