Allied Telesis SwitchBlade x3100 Series Manual page 633

Configuring Queue Mapping
SET QOS
Syntax
SET QOS [ VLAN4QUEUEMAP=value-map ] [ VLAN8QUEUEMAP=value-map ]
Sets the mapping of VLAN priority bits to egress queues. This allows the user to config-
Description
ure the prioritization of traffic through the system. The VLAN8QUEUEMAP is applied to
interfaces capable of 8 egress queues, while the VLAN4QUEUEMAP is applied to inter-
faces capable of 4 egress queues. The format for entering VLAN4QUEUEMAP and
VLAN8QUEUEMAP is a comma-delimited list of 8 egress queue number values. The
default example of a comma-delimited list of 8 egress queues: SET QOS
VLAN4QUEUEMAP=0,0,1,1,2,2,3,3 VLAN8QUEUEMAP=0,1,2,3,4,5,6,7
To display the mapping of VLAN priority field values to egress queues, use the command:
SHOW
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
VLAN4QUE
UEMAP
VLAN8QUE
UEMAP
LAN
Example
SET QOS VLAN8QUEUEMAP=0,0,0,0,1,0,2,0 VLAN4QUEUEMAP=0,0,0,0,1,0,2,0
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
QOS.
Description
The Mapping of VLAN priority bits to egress queue
numbers.
The Mapping of VLAN priority bits to egress queue
numbers.
HV-
Introduction
Default Value
0,0,1,1,2,2,3,3
0,1,2,3,4,5,6,7
6-73