Allied Telesis SwitchBlade x3100 Series Manual page 350

Introduction
TABLE 4-3
Step Command
disable interface 3.0 force
5
set interface 3.0 ge duplex full flow-
control off
delete vlan 10 interface 3.0
add vlan 1500 interface 3.0 frame
untagged
enable interface 3.0
Add the 3rd interface to the LAG
add lag sfp interface 3.0
6
View settings for the LAG
show lag
7
--- LAG Info Data --------------------------------------------------------------------
LAG Name
-------------------- ------------------------ -------- ------------ ----- -----------
sfp
LAG Name
-------------------- ------------------------ -------- ------------ ----- -----------
sfp
4-30
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Configuration Procedure for Creating a Cross-Card LAG
Provisioned Ports
0.8-0.9, 3.0
Enabled Ports
0.8-0.9, 3.0
Description/Notes
First, disable interface.
Modifies settings (duplex and flow control) so
as to match those of customer interfaces 0.8
and 0.9.
Removes VLAN 10 association.
Associates interface with VLAN 1500, so as to
match configuration for interfaces 0.8 and 0.9.
Re-enables interface.
Adds the LAG on interface 3.0.
Mode Select Admin Index
Criteria
on portboth & 1
ipboth &
macboth
Speed Oper State Dir
3 Gbps Up Ntwk
Configuring LAG
Key
0
Interface
ID
LAG:0