Allied Telesis SwitchBlade x3100 Series Manual page 134

Introduction
PUT FILE CARD
Syntax
PUT FILE={ sourcefile | unit:sourcefile } CARD={ slot | slot-list }
Transfers the specified file from the CFC flash file system or specified SD card to the
Description
given destination. The destination is a card or set of cards in the shelf. The source file
must already exist on the flash file system.
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Example
PUT FILE SD5:D104_14.1.0.CFG CARD 10-11
1-104
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Option Description
FILE The file name on the CFC FLASH memory. The unit can
also be included.
CARD The slot(s) of the cards that will receive the file.
CFC Media (SD Card)
Default Value