Allied Telesis SwitchBlade x3100 Series Manual page 923

Introduction
RESET CARD CPUSTATS
Syntax
RESET CARD={ slot-list | ACTCFC | INACTCFC | ALL } { CPUSTATS [
TASKS ] }
Resets the CPU usage statistics (CFC only) and memory usage statistics (CFC only)
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
CARD
CPUSTATS
Example
RESET CARD 4,5 CPUSTATS
Software Reference for SwitchBlade x3100 Series Switches (Alarms and Troubleshooting)
Description
slot-list - a comma delimited list of slots
ACTCFC - The currently active CFC, which can be slot
4 or 5.
INACTCFC - The currently inactive CFC
ALL - Both CFC cards
CPUSTATS - CPUSTATS including per-task cpu data and
high water marks are reset.
TASKS - Resets the current counts associated with
tasks. These include the current 5 second, 1 minute, and
5 minute counts along with the associated highwater
mark values.
Viewing the CPUSTATS (High Water Mark)
Default Value
8-51