Allied Telesis SwitchBlade x3100 Series Manual page 75

Password Recovery
SET LOGIN BANNER (SEC)
Syntax
SET LOGINBANNER { FILE=filename | STRING=string }
[ { USER | MANAGER | SECURITYOFFICER | ALL } ]
Allows the Security Officer user to change the login banner.
Description
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
FILE
STRING
Security Level
Example
SET LOGINBANNER STRING="Allied Telesis SBx3112"
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Description
If the FILE parameter is provided, the contents of
the file is retrieved and stored locally. The con-
tents of the file is also retrieved upon system
reboot. If the file is deleted or replaced, the local
storage of the loginbanner is not updated unless
the command is re-run or the system is rebooted.
If the STRING parameter is provided, the contents
of the string is stored locally and persisted for use
after system reboots. The maximum length of the
STRING value is 255 characters.
The USER, MANAGER, SECURITYOFFICER and
ALL parameters define which user level(s) the log-
inbanner is applied to.
Introduction
Default Value
1-45