Allied Telesis SwitchBlade x3100 Series Manual page 617

Configuring the Ingress Metering
SET TRAFFICDESCRIPTOR
Syntax
SET TRAFFICDESCRIPTOR=tdname-list [ RATE=bits-per-second ] [ BURST-
SIZE={ 4KB | 8KB | 16KB | 32KB | 64KB | 128KB | 256KB | 512KB | 1MB
| 2MB | 4MB | 8MB | 16MB | 32MB | 64MB } ]
Modifies one or more TRAFFICDESCRIPTORs. This applies new values for RATE and
Description
BURSTSIZE for all CLASSIFIERS to which the TRAFFICDESCRIPTOR(s) are associated.
Refer to
The following table gives the range of values for each option that can be specified with
Options
this command and a default value (if applicable).
Option
TRAFFICDE-
SCRIPTOR
RATE=bits-
per-second
BURSTSIZE
Example
SET TRAFFICDESCRIPTOR=large_rate RATE=2M BURSTSIZE=256KB
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
CREATE TRAFFICDESCRIPTOR RATE BURSTSIZE
Description
The name(s) of the already created TRAFFICDESCRIP-
TOR(s), separated by a comma.
Refer to CREATE TRAFFICDESCRIPTOR RATE
BURSTSIZE
Refer to CREATE TRAFFICDESCRIPTOR RATE
BURSTSIZE
Introduction
for details on options.
Default Value
6-57