Allied Telesis SwitchBlade x3100 Series Manual page 377

Configuring Standard VLANs
SET VLAN FORWARDINGMODE
Changes the type of VLANs specified to either Standard or Upstream Forwarding Only
Description
(UFO). For information on UFO VLANs refer to
Mode.
Syntax
SET VLAN={ vlanname-list | vid-range } FORWARDINGMODE={ STD |
UPSTREAMONLY }
The following table gives the range of values for each option that can be specified with
Options
this command and a Default Value (if applicable).
Option
VLAN
FORWARDING-
MODE
Example
SET VLAN=4004 FORWARDINGMODE=UPSTREAMONLY
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
Description
A comma-delimited list of VLAN names or VLAN
number range (e.g., 4-6).
STANDARD - Traffic can be forwarded to either
upstream or downstream interfaces.
UPSTREAMONLY - Traffic can only be forwarded
to upstream interfaces.
Upstream Forwarding Only (UFO)
Default Value
Introduction
4-57